Introduction
Use this guide to replace the back cover of your Huawei P10 smartphone.
What you need
-
-
-
Switch off your phone.
-
Remove the two Pentalobe P2 screws at the bottom.
-
Remove the SIM card tray.
Ask FixBot
-
-
-
-
Insert a plastic opening tool between the display and the case starting at the bottom area of your phone.
-
Carefully pry the display with its parts out of the case.
-
After you pried out the bottom end, use the opening tool to open the clamps on both sides.
-
-
-
Swing open the phone backwards.
-
Use a spudger to disconnect the power- and volume button flex cable.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
