Skip to main content

Free Shipping on Domestic Orders $75+

How to clean and maintain your Vape Mod

Views: 12K

View statistics:

Past 24 Hours:
11
Past 7 Days:
54
Past 30 Days:
179
All Time:
12,401
Comments: 0

No one has left comments on this guide. Will you be first?

Go to guide comments
Completed: 14

14 people have marked this guide "completed." Will you be next?

Favorites: 25

25 people have favorited (and subscribed to) this guide. Will you be next?

Time Required: 10 - 15 minutes
Difficulty: Moderate
How to clean and maintain your Vape Mod

Introduction

Go to step 1 ↓

This guide will teach you how to take apart your Vape Mod completely, analyze which parts need to be cleaned, and how to correctly clean them.

What you need

    1. How to clean and maintain your Vape Mod, How to clean and maintain your Vape Mod: step 1, image 1 of 3 How to clean and maintain your Vape Mod, How to clean and maintain your Vape Mod: step 1, image 2 of 3 How to clean and maintain your Vape Mod, How to clean and maintain your Vape Mod: step 1, image 3 of 3
      • Although maintenance for your Vape Mod shouldn't be dangerous, it can be messy. It is recommended to do this on top of a paper towel.

      • Start by removing the top cap of your Vape Mod.

      Ask FixBot

      Add Comment

    2. How to clean and maintain your Vape Mod: step 2, image 1 of 3 How to clean and maintain your Vape Mod: step 2, image 2 of 3 How to clean and maintain your Vape Mod: step 2, image 3 of 3
      • Unscrew RDA (rebuildable dripping atomizer) and take it off.

      Ask FixBot

      Add Comment

    3. How to clean and maintain your Vape Mod: step 3, image 1 of 3 How to clean and maintain your Vape Mod: step 3, image 2 of 3 How to clean and maintain your Vape Mod: step 3, image 3 of 3
      • Many Vape Mods are different, you might have to take out your battery in a different way than shown.

      • At the bottom of the tube, unscrew the firing pin.

      • Take the battery out of the Vape Mod.

      Ask FixBot

      Add Comment

    4. How to clean and maintain your Vape Mod: step 4, image 1 of 3 How to clean and maintain your Vape Mod: step 4, image 2 of 3 How to clean and maintain your Vape Mod: step 4, image 3 of 3
      • Inspect all of the parts that will need to be cleaned:

      • The firing pin

      • The RDA threading

      • The bottom of the inside of the tube

      Ask FixBot

      Add Comment

    5. How to clean and maintain your Vape Mod: step 5, image 1 of 2 How to clean and maintain your Vape Mod: step 5, image 2 of 2
      • Clean the Firing pin by dipping a paper towel into hot water.

      • Carefully rotate the hot towel around the middle area, rubbing the grime away.

      Ask FixBot

      Add Comment

    6. How to clean and maintain your Vape Mod: step 6, image 1 of 3 How to clean and maintain your Vape Mod: step 6, image 2 of 3 How to clean and maintain your Vape Mod: step 6, image 3 of 3
      • Get a new paper towel wet with the hot water.

      • Clean the RDA threading by rotating the wet paper towel back and forth across it.

      Ask FixBot

      Add Comment

    7. How to clean and maintain your Vape Mod: step 7, image 1 of 3 How to clean and maintain your Vape Mod: step 7, image 2 of 3 How to clean and maintain your Vape Mod: step 7, image 3 of 3
      • Get a new paper towel wet with the hot water.

      • Twist it until it can easily fit inside of the tube.

      • Use your finger or another long tool to rotate the paper towel along the sides and the bottom of the tube.

      Ask FixBot

      Add Comment

    8. How to clean and maintain your Vape Mod: step 8, image 1 of 3 How to clean and maintain your Vape Mod: step 8, image 2 of 3 How to clean and maintain your Vape Mod: step 8, image 3 of 3
      • Put your Vape Mod back together by doing steps 1 - 2 in reverse. (Leave the mouthpiece of the top cap off).

      • Careful, firing your Vape Mod produces heat and can make the device HOT!

      • Fire your Vape Mod. If the coils are heating up, it has been fixed!

      Ask FixBot

      Add Comment

Conclusion

If your Vape Mod is still not firing, consider getting a new build.

Cancel: I did not complete this guide.

14 other people completed this guide.

Jessie Smith

Member since: 09/29/15

704 Reputation

1 Guide authored

Team

Cal Poly, Team 14-3, Green Fall 2015 Member of Cal Poly, Team 14-3, Green Fall 2015

CPSU-GREEN-F15S14G3

4 Members

48 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 11

Past 7 Days: 54

Past 30 Days: 179

All Time: 12,401