This translation was generated by a machine and has not been reviewed by a person yet. Speak this language? Review it.
How to change the RAM on a Restart PC
Modixia and one other contributor
Last updated on Sep 2, 2026
Views: 213
View statistics:
- Past 24 Hours:
- 0
- Past 7 Days:
- 9
- Past 30 Days:
- 56
- All Time:
- 213
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Needs More Images
A few more images would make this guide's procedures crystal clear.
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓This guide will explain how to change or add a RAM stick in your Restart PC.
-
-
-
I disconnected the various connectors to be more comfortable.
-
Place the computer on a clean table.
Ask FixBot
-
-
-
Using a Phillips screwdriver, remove the side screws.
-
Carefully remove the top plate.
-
-
-
-
Locate the RAM slot. It is not always in the same place on every motherboard.
-
Remove the old RAM stick, if necessary.
-
Add the new RAM stick(s).
-
-
To reassemble your device, follow the instructions in reverse order.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
