Introduction
Over time, frequent fountain pen use can lead to a clogged pen with little to no ink flow. Repairing a clogged fountain pen might seem daunting, but this easy-to-follow guide demonstrates how to get your pen writing again.
Before using this guide, review the Troubleshooting page as oftentimes, a faulty fountain pen can result from a damaged nib or dry ink. Otherwise, it may be clogged. Review the Anatomy of a Fountain Pen to identify the different parts of your pen.
What you need
-
-
-
Remove the ink cartridge from the section.
-
Run the section under warm running water.
-
-
-
Remove the feed and nib from the section.
-
Separate the nib and the feed.
-
Run the nib and feed under warm water and use a soft bristle toothbrush to gently scrub the ink residue on the two pieces.
-
-
-
-
Leave the nib, feed, and section to air dry until completely dry.
-
Reassemble and test the pen
-
-
-
To create the cleaning solution, mix equal parts of ammonia and water in a container.
-
Add a few drops of dish soap to the solution and stir.
-
-
-
Drop the nib and feed in the cleaning solution.
-
Soak the pieces for approximately 12-24 hours.
-
-
-
When it's dry, replace the ink cartridge or converter and reassemble the fountain pen.
-
Ask FixBot
Reassemble your fountain pen and you are ready to write.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
UC Davis, Team 2-2, Andersen Winter 2024 Member of UC Davis, Team 2-2, Andersen Winter 2024
UCD-ANDERSEN-W24S2G2
3 Members
12 Guides authored
