Skip to main content

Free Shipping on Domestic Orders $75+

How to True a Bent Bicycle Rim Using Common Tools

Views: 2.8K

View statistics:

Past 24 Hours:
7
Past 7 Days:
47
Past 30 Days:
214
All Time:
2,787
Comments: 0

No one has left comments on this guide. Will you be first?

Go to guide comments
Completed: 3

3 people have marked this guide "completed." Will you be next?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: 10 - 20 minutes
Difficulty: Easy
Featured Student Guide

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

How to True a Bent Bicycle Rim Using Common Tools

Introduction

Go to step 1 ↓

Bike rim maintenance is an integral part of ensuring a bicycle works properly. Neglecting a bent rim can further compromise the bike's structural integrity, as every turn wears down the brake pads due to scraping.

This guide will show you how to straighten or true your bent bicycle rim using common tools. Truing the bike rim only requires a pair of pliers, and a desire to get one's mode of transportation working as good as new again!

What you need

Tools

    1. How to True a Bent Bicycle Rim Using Common Tools, How to True a Bent Bicycle Rim Using Common Tools: step 1, image 1 of 1
      • Bring your bike somewhere with ample space so you have room to work.

      Ask FixBot

      Add Comment

    2. How to True a Bent Bicycle Rim Using Common Tools: step 2, image 1 of 3 How to True a Bent Bicycle Rim Using Common Tools: step 2, image 2 of 3 How to True a Bent Bicycle Rim Using Common Tools: step 2, image 3 of 3
      • Flip the bike on its seat so the wheel can spin freely.

      • Use the spokes to spin the affected wheel.

      • Continue spinning the wheel until it is clear where the bend is occurring.

      Ask FixBot

      Add Comment

    3. How to True a Bent Bicycle Rim Using Common Tools: step 3, image 1 of 2 How to True a Bent Bicycle Rim Using Common Tools: step 3, image 2 of 2
      • Locate the bend by spinning the wheel to see where it doesn't align with the brake.

      Ask FixBot

      Add Comment

    4. How to True a Bent Bicycle Rim Using Common Tools: step 4, image 1 of 3 How to True a Bent Bicycle Rim Using Common Tools: step 4, image 2 of 3 How to True a Bent Bicycle Rim Using Common Tools: step 4, image 3 of 3
      • Locate the two nearest spoke nipples opposite to the bend direction and tighten them a half turn using an adjustable wrench or reaming pliers.

      Ask FixBot

      Add Comment

    5. How to True a Bent Bicycle Rim Using Common Tools: step 5, image 1 of 2 How to True a Bent Bicycle Rim Using Common Tools: step 5, image 2 of 2
      • Pluck the spoke and listen to the pitch to check its tightness.

      • If the pitch is higher, you are tightening it, and if the pitch is lower, you are loosening it.

      Ask FixBot

      Add Comment

    6. How to True a Bent Bicycle Rim Using Common Tools: step 6, image 1 of 2 How to True a Bent Bicycle Rim Using Common Tools: step 6, image 2 of 2
      • Loosen the spoke nipples opposite to the ones being tightened to reduce stress in the wrong direction.

      Ask FixBot

      Add Comment

    7. How to True a Bent Bicycle Rim Using Common Tools: step 7, image 1 of 1
      • Assess the dent in the bike rim and assure it's mostly straightened out relative to the break pad.

      • Repeat the tightening/loosening process accordingly if necessary.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

3 other people completed this guide.

Charles Tweedy

Member since: 04/19/23

199 Reputation

1 Guide authored

Team

UCD-MORRIS-S23S1G4 Member of UCD-MORRIS-S23S1G4

Community

2 Members

12 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 7

Past 7 Days: 47

Past 30 Days: 214

All Time: 2,787