Introduction
This guide is an easy way to shorten the band of a wristwatch by removing the watch links. Watch bands are manufactured longer so they can be adjusted to your wrist size. You should complete this guide on a table or sturdy work surface. I recommend to save any watch links you remove from the watch just in case you need them in the future.
What you need
-
-
Find the arrows inside the band and place the watch so the arrows are facing down.
-
-
-
-
Place a nail in the hole on the opposite side of the arrow.
-
Gently tap the nail into the hole with a small hammer.
-
-
-
Join the clock's bands and insert the pin in the same direction as the arrow until it is sealed.
-
Ask FixBot
Cancel: I did not complete this guide.
9 other people completed this guide.
Team
University of Puerto Rico Mayagüez, Team 2-6, Cools Stephens Fall 2021 Member of University of Puerto Rico Mayagüez, Team 2-6, Cools Stephens Fall 2021
UPRM-COOLS STEPHENS-F21S2G6
1 Member
3 Guides authored
1 Guide Comment
Never knew how easy it was until I went through this guide. Appreciate how simple you made it
