Introduction
This guide shows how to activate your iPhone's pressure sensitive adhesive (PSA) with heavy books, once you're done with repairs and are ready to seal it up.
The procedure works with all iPhones that don't have a physical Home button. The guide's written with an iPhone 16 Pro Max.
What you need
-
-
-
Use your fingers to firmly squeeze around the perimeter of the iPhone.
Ask FixBot
-
-
-
-
Place your iPhone screen-side down on a clean, flat work surface.
-
Lay a strip of tape around the perimeter of the back glass to protect the finish.
-
Stack coins around the perimeter of the back glass until you create a wall that's as tall as the rear camera protrusions.
-
-
-
Place 3-4 heavy books squarely on top of your iPhone.
-
Leave the books in place for about 30 minutes.
-
-
Cancel: I did not complete this guide.
One other person completed this guide.
