How to Restore Contact Point Electrodes
Chelsea and 2 other contributors
Last updated on Jul 23, 2019
Views: 696
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 13
- Past 30 Days:
- 91
- All Time:
- 696
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓Reshaping the contact point electrodes which hold bObi's dustbin in place can resolve installation and bin latching difficulties.
What you need
Tools
-
-
-
Remove bObi's dustbin:
-
Push down on the button found on bObi's back to release the dustbin.
Ask FixBot
-
-
-
Inside bObi are two contact point electrodes, secured with a small red fastener and two screws.
-
Use a screwdriver to reach underneath the electrodes and pull upward gently to bend them back to the correct shape.
-
-
-
-
When the electrodes are fixed, slide the dustbin back into bObi. The HEPA filter side of the dustbin should face down.
-
Ensure it locks in place, and the contact point electrodes will line up correctly, so bObi can resume functioning.
-
-
To reassemble your device, follow these instructions in reverse order.
