Skip to main content

Free Shipping on Domestic Orders $75+

How to Repair a Trophy

Views: 3.8K

View statistics:

Past 24 Hours:
4
Past 7 Days:
31
Past 30 Days:
120
All Time:
3,776
Comments: 0

No one has left comments on this guide. Will you be first?

Go to guide comments
Completed: 0

No one has marked this guide "completed." Will you be the first?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: 10 - 20 minutes
Difficulty: Easy
How to Repair a Trophy

Introduction

Go to step 1 ↓

Over the years, dust, dirt and poor treatment may damage your trophy. This guide will show you how to fix one step-by-step. Trophies are a way of keeping in mind the efforts and sacrifices you've made in a particular sport or hobby. Simple tools that you probably have at home were used to repair this trophy. So if you want to remember some of your achievements and treasure them, I invite you to have fun fixing your most precious trophies.

    1. How to Repair a Trophy, How to Repair a Trophy: step 1, image 1 of 3 How to Repair a Trophy, How to Repair a Trophy: step 1, image 2 of 3 How to Repair a Trophy, How to Repair a Trophy: step 1, image 3 of 3
      • Put the cylindrical tube on the small threaded rod of the cup.

      • Turn to the right until you tighten it completely.

      Ask FixBot

      Add Comment

    2. How to Repair a Trophy: step 2, image 1 of 3 How to Repair a Trophy: step 2, image 2 of 3 How to Repair a Trophy: step 2, image 3 of 3
      • Place the longest threaded rod on the opposite side of the cylindrical tube and twist again to the right until it is tight.

      Ask FixBot

      Add Comment

    3. How to Repair a Trophy: step 3, image 1 of 3 How to Repair a Trophy: step 3, image 2 of 3 How to Repair a Trophy: step 3, image 3 of 3
      • Put all the pieces on in the correct order.

      • If you put them on in the wrong order they won't fit.

      Ask FixBot

      Add Comment

    4. How to Repair a Trophy: step 4, image 1 of 3 How to Repair a Trophy: step 4, image 2 of 3 How to Repair a Trophy: step 4, image 3 of 3
      • Insert the nut into the hub of the 3/8 drive ratchet wrench.

      • Use the 3/8 inch ratchet wrench to secure the nut at the bottom of the trophy. Turn the nut clockwise until it is fully secure.

      Ask FixBot

      Add Comment

    5. How to Repair a Trophy: step 5, image 1 of 3 How to Repair a Trophy: step 5, image 2 of 3 How to Repair a Trophy: step 5, image 3 of 3
      • Glue the remaining two pieces to the side of the trophy.

      • Allow them to dry before touching to prevent them from coming off.

      Ask FixBot

      Add Comment

    6. How to Repair a Trophy: step 6, image 1 of 1
      • Wait some time (approximately 30 minutes) until the pieces have dried completely.

      • And your done!!

      Ask FixBot

      Add Comment

Conclusion

This work will be completed when all the pieces are tight and without coming off. Remember not to touch the glued pieces too much to avoid breaking them again. I hope you had fun arranging a good memory.

Cancel: I did not complete this guide.

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 31

Past 30 Days: 120

All Time: 3,776