Skip to main content

Free Shipping on Domestic Orders $75+

How to Repair a Broken Jump Ring

Views: 2.2K

View statistics:

Past 24 Hours:
0
Past 7 Days:
14
Past 30 Days:
106
All Time:
2,172
Comments: 0

No one has left comments on this guide. Will you be first?

Go to guide comments
Completed: 1

1 person has marked this guide "completed." Will you be next?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: 5 - 10 minutes
Difficulty: Easy
How to Repair a Broken Jump Ring

Introduction

Go to step 1 ↓

If your dangling earring has suddenly fallen apart, making it unwearable, odds are the jump ring has opened a little too far. Although jump rings are made of soft, flexible metal, and fail easily and often, thankfully they're also very easy to repair.

To fix your jump ring, you only need a pair of tools that can be easily found in any hardware or arts-and-crafts store: two needle nose pliers.

As jump rings are very small, we recommend working in a well lit area.

What you need

Tools

    1. How to Repair a Broken Jump Ring, How to Repair a Broken Jump Ring: step 1, image 1 of 1
      • Firmly grasp the broken jump ring using one set of small needle-nose pliers.

      • Make sure that the ring's opening is not blocked by the pliers.

      Ask FixBot

      Add Comment

    2. How to Repair a Broken Jump Ring: step 2, image 1 of 1
      • Grasp the opposite side of the jump ring with your other pair of small needle noise pliers.

      Ask FixBot

      Add Comment

    3. How to Repair a Broken Jump Ring: step 3, image 1 of 1
      • Gently twist the pliers in opposite directions until the gap is wide enough to reattach the jump ring to the ear wire.

      Ask FixBot

      Add Comment

    4. How to Repair a Broken Jump Ring: step 4, image 1 of 2 How to Repair a Broken Jump Ring: step 4, image 2 of 2
      • Grasp the ear wire (if applicable) and insert its loop into the opening of the jump ring.

      Ask FixBot

      Add Comment

    5. How to Repair a Broken Jump Ring: step 5, image 1 of 2 How to Repair a Broken Jump Ring: step 5, image 2 of 2
      • Insert your earring into the opening of the jump ring.

      Ask FixBot

      Add Comment

    6. How to Repair a Broken Jump Ring: step 6, image 1 of 2 How to Repair a Broken Jump Ring: step 6, image 2 of 2
      • Grasp the jump ring between your two pairs of pliers and push/twist the two ends of the ring toward each other, until the two ends meet and the gap is closed.

      • Make sure that the gap is closed tight!

      Ask FixBot

      Add Comment

Conclusion

Your earrings are ready to be worn again!

Cancel: I did not complete this guide.

One other person completed this guide.

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 14

Past 30 Days: 106

All Time: 2,172