How to Reattach an Apron Strap
Magaly Valdez and one other contributor
Last updated on Jun 15, 2021
Views: 2K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 28
- Past 30 Days:
- 112
- All Time:
- 1,951
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 3 4
3 people have marked this guide "completed." Will you be next?
4 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Better Introduction
Improve this guide by completing or revising its introduction.
Introduction
Go to step 1 ↓This guide will show you how to reattach a torn or broken apron strap.
A kitchen apron is used for keeping your clothes clean while cooking. It is important to do this replacement because a kitchen apron is a helpful equipment to keep yourself from getting dirty. The straps are especially important to repair because they are the main important part of holding the whole apron together.
Step 4 has a caution, might poke yourself with the sewing needle.
Before beginning make sure all your tools are available to you.
What you need
Tools
-
-
-
Use a thread color that matches your article of clothing (or whatever color you like).
-
Cut a piece of thread around 21 centimeters long.
-
Insert one side of the thread in the eye of the sewing needle.
Ask FixBot
-
-
-
Pull the thread to make sure it is in the hole.
-
Make sure the apron is aligned correctly.
-
Insert the needle from where you want to start to repair the fabric.
-
Begin from right to left.
-
-
-
Once inserted, make a knot so the thread can't move. Pull the thread as far as possible but still able to create a knot.
-
Insert the threaded needle a short distance from where you began, starting again from right to left.
-
-
-
Continue sewing from right to left, starting each new stitch a few centimeters from the previous stitch.
-
Make sure the thread goes all the way through.
-
-
-
Once you reach the end of the left side, make two small knots.
-
Begin from the bottom and pull to tighten the knot.
-
-
-
-
Make sure the apron is aligned correctly and not loose from both sides.
-
Tug on the strap to make sure it is not loose.
-
-
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
CSU Los Angeles, Team S1-G3, Harris Spring 2021 Member of CSU Los Angeles, Team S1-G3, Harris Spring 2021
CSULA-HARRIS-S21S1G3
1 Member
12 Guides authored
