Introduction
Bring life back to your Apple Watch with a brand new, out of the box look following these steps. This guide instructs you to remove scratches from the stainless steel casing of an apple watch. It is intended to clean scratches off safely without damaging any sensitive parts.
Parts Needed
1x Pair of rubber gloves
1x Microfiber Cloth
1x Cape Cod Polishing Cloth
What you need
-
-
Remove the straps by pressing the button adjacent to each side and sliding the band right out.
-
-
-
Tool used on this step:Microfiber Cleaning Cloths$3.99
-
Clean the watch with a microfiber cloth.
-
Make sure all smudges are removed at this point.
-
-
-
Put on Gloves. Using a polishing cloth, which is already soaked with polishing cream, rub one side of the watch back and forth.
-
Repeat on each side of the watch.
-
-
-
Grab your microfiber cloth and go over the same area that you previously wiped until the residue is gone and you have restored the side to it’s previous mirror finish.
-
Repeat on each side of the watch.
-
-
-
After the watch has been restored, slide the straps back into place (you will feel a click).
-
Ask FixBot
Congratulations! You have finished buffing your Apple watch!
Cancel: I did not complete this guide.
2 other people completed this guide.
1 Guide Comment
Does this work for the gold or graphite cases as well?
