Skip to main content

Free Shipping on Domestic Orders $75+

Hover-1 Rally Acceleration Lever Replacement

Views: 3.5K

View statistics:

Past 24 Hours:
2
Past 7 Days:
14
Past 30 Days:
55
All Time:
3,494
Comments: 6

6 guide comments.

Go to guide comments
Completed: 2

2 people have marked this guide "completed." Will you be next?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: 10 minutes
Difficulty: Easy
Hover-1 Rally Acceleration Lever Replacement

Introduction

Go to step 1 ↓

If your Hover-1 Rally (model H1-RALY) scooter will not accelerate, use this guide to replace the acceleration lever. The acceleration lever is located next to the right handlebar grip and is easy to replace. Replace this part if it is damaged or immovable.

Make sure to power off the scooter before starting this guide.

What you need

Tools

    1. Hover-1 Rally Acceleration Lever Replacement, Acceleration Lever: step 1, image 1 of 1
      • Remove one 4 mm Phillips #1 screw located directly above the acceleration lever.

      Ask FixBot

      Add Comment

    2. Hover-1 Rally Acceleration Lever Replacement: step 2, image 1 of 2 Hover-1 Rally Acceleration Lever Replacement: step 2, image 2 of 2
      • Turn the right handle grip counterclockwise.

      • The right handle will disconnect from the handlebar, exposing the acceleration lever.

      Ask FixBot

      Add Comment

    3. Hover-1 Rally Acceleration Lever Replacement: step 3, image 1 of 1
      • Remove four 2 mm Phillips #00 screws located on the acceleration throttle.

      Ask FixBot

      Add Comment

    4. Hover-1 Rally Acceleration Lever Replacement: step 4, image 1 of 1
      • Pull the acceleration lever off of the handle.

      • The acceleration lever sits perpendicular to the handle.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

2 other people completed this guide.

Van Schneider

Member since: 02/10/20

133 Reputation

1 Guide authored

Team

Cal Poly, Team S7-G2, Regan Winter 2020 Member of Cal Poly, Team S7-G2, Regan Winter 2020

CPSU-REGAN-W20S7G2

6 Members

60 Guides authored

6 Guide Comments

Where did you find the lever?

Jaimi Erwin - Reply Share

See comment below. Swap out your power throttle with the brake lever. Or reach out to Hover-1 for spare parts.

Chris Serio - Reply Share

Thank you Mr Fix It Man. I haven't used my scooter in months and never tried to find parts. Swapped my throttle out with my brake lever and we're good to go hehe

Chris Serio - Reply Share

The throttle lever on my daughter’s scooter broke off and I have been unable to get through to Hover for replacement parts (both online and tried to call). Do you know of any universal levers that would work? Or where I could locate a lever? Bought this for my daughter to get to college classes and this is her first week and it broke (out of 90 day warranty, of course.)

Sharon Kolson - Reply Share

Il marche pas

Youssef Hssini - Reply Share

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 14

Past 30 Days: 55

All Time: 3,494