Hitachi CP-X440 Lamp Replacement
Abby Myers and one other contributor
Last updated on May 6, 2022
Views: 460
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 15
- Past 30 Days:
- 59
- All Time:
- 460
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓In this guide, users will learn how to replace the lamp in the Hitachi CP-X440 Projector. If the Projector is not displaying an image when turned on, the lamp may need replacing.
What you need
Tools
-
-
-
Flip the projector upside down so the bottom end is showing and press down the two tabs on the bottom left of the projector
-
Lift the lamp cover up and set to the side
Ask FixBot
-
-
-
Use a Flathead #4 screwdriver to remove the two 1.0 cm silver screws from the back of the lamp piece.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Team
University of Alabama, Team 2-2, Bedsole Spring 2022 Member of University of Alabama, Team 2-2, Bedsole Spring 2022
UA-BEDSOLE-S22S2G2
4 Members
72 Guides authored
