Introduction
This camera replacement guide demonstrates how to remove the necessary components to access the camera. Replacing the camera is a simple three step process using the necessary tools.
What you need
-
-
-
Use the plastic opening tools to pry open the back case of the device.
Ask FixBot
-
-
-
Tool used on this step:Tweezers$4.99
-
Use tweezers to remove the black adhesive strips from the wires. Set aside
-
-
-
Use a spudger to undo the black clip connecting the camera wires to the motherboard.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
UMass Dartmouth, Team 1-1, Miles Fall 2015 Member of UMass Dartmouth, Team 1-1, Miles Fall 2015
UMASSD-MILES-F15S1G1
3 Members
60 Guides authored
