HTC Maple 100 Back Panel Replacement
Andrew Van Meter and 7 other contributors
Last updated on Jan 8, 2020
Views: 1.1K
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 7
- Past 30 Days:
- 31
- All Time:
- 1,123
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Better Introduction
Improve this guide by completing or revising its introduction.
Introduction
Go to step 1 ↓Remove 4 Torx screws and 2 #00 Philps
What you need
Tools
-
-
-
-
Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone.
-
-
-
-
Remove the two 4.3mm Phillips #00 screws that secure the back panel to the rest of the phone.
-
-
-
Insert the plastic opening tool along the seams at different points to it pry the clips off.
-
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 20-29, Maness Fall 2011 Member of Cal Poly, Team 20-29, Maness Fall 2011
CPSU-MANESS-F11S20G29
4 Members
108 Guides authored
