HTC Desire 816 Front Facing Camera Replacement
Saleena Douangphachanh and 4 other contributors
Last updated on May 7, 2024
Views: 1.8K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 24
- Past 30 Days:
- 92
- All Time:
- 1,777
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 2 3
2 people have favorited (and subscribed to) this guide. Will you be next?
3 people have favorited (and subscribed to) this guide — including you!
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Introduction
Go to step 1 ↓Capturing images is how people retain visible proof of memories being created. This guides purpose is to help the user replace a major key component in a cellular device that gives users the ability to see themselves.
What you need
Tools
-
Spudger4.9
-
-
-
-
Pry open the back panel by inserting the plastic opening tool on the left of the camera. We find this spot the easiest to get the tool under the panel.
Ask FixBot
-
-
-
Once you get an open spot, with a second plastic opening tool, slide down to the bottom of the phone to free the rest of side.
-
-
-
There is adhesive between the battery and the back panel. Take a nylon spudger to cut through the adhesive.
-
-
-
Once all way around the bottom, the panel should be broken free of the adhesive, and the rest of the panel should pop right off.
-
-
-
Insert a nylon spudger at the bottom of the battery and lift up to remove the battery.
-
-
-
-
There is adhesive on the other side of the battery as well, take the nylon spudger used to get off the panel and cut through.
-
-
-
-
-
Using the T5 screwdriver, unscrew these four screws in order to remove the plastic casing.
-
-
-
Using the PH000 screw driver head, unscrew the one screw that is holding down the mother board. (This screw is located on the left side of the motherboard.)
-
-
Tool used on this step:Tweezers$4.99
-
Using a pair of tweezers, gently disconnect the battery wire from the motherboard.
-
-
-
Using a pair of tweezers, lift the white part of the connector and disconnect the camera from the motherboard.
-
-
-
Use a pair of tweezers to slide the camera out and remove the camera from the device.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
UMass Dartmouth, Team 5-3, Landers Spring 2016 Member of UMass Dartmouth, Team 5-3, Landers Spring 2016
UMASSD-LANDERS-S16S5G3
3 Members
72 Guides authored
