Introduction
The Touchsmart 600 comes with a Core 2 Duo stock CPU, but the CPU is socketed so it can be removed and upgraded.
-
-
Flip the computer screen down, and flip the cover on the stand up.
-
Remove the screw and slide the panel down to remove the cover.
Ask FixBot
-
-
-
Unscrew the 4 screws holding the stand to the computer and pull the stand down to remove it.
-
-
-
Pull up on the bezel from the bottom. As long as you are careful, you should be able to remove them without breaking any clips
-
-
-
-
Pull up on the bottom of the panel and hinge it.
-
It will come off, set it aside
-
-
-
Unscrew the plate over the CPU
-
It uses a small phillips head, one of the only non torx bits in the computer
-
After unscrewing the plate, flip the fan off of the CPU
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
