HP Stream 13-c010nr Charging Port Replacement
Keegan Lapham and 2 other contributors
Last updated on Aug 15, 2019
Views: 893
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 18
- Past 30 Days:
- 57
- All Time:
- 893
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Better Introduction
Improve this guide by completing or revising its introduction.
Introduction
Go to step 1 ↓This guide will teach you how to replace the Charging Ports on the HP Stream 13-c010nr.
What you need
Tools
-
Spudger4.9
-
-
-
-
Remove the five rubber feet from the bottom of the laptop with a plastic opening tool.
Ask FixBot
-
-
-
Flip the laptop over and open it up.
-
Wedge a plastic opening tool between the keyboard and bottom case, pry upwards to separate the two pieces.
-
Lift up the keyboard.
-
-
-
Use a spudger to flip up the retaining flaps on the keyboard ribbon cable ZIF sockets.
-
Pull up the ribbon cables from their sockets.
-
-
-
-
-
-
Remove the two 5mm Phillips screws from the charging port.
-
Remove the bracket.
-
Pull out the charging port.
-
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team S1-G3, Cagle Spring 2018 Member of USF Tampa, Team S1-G3, Cagle Spring 2018
USFT-CAGLE-S18S1G3
4 Members
72 Guides authored
