Introduction
Using this guide, you should be able to replace the network card on your laptop. If you are having internet connectivity issues, this guide could be your best bet for fixing them. Do note that when replacing the part, make sure the gold connection pins are fully connected when putting the network card in place.
What you need
-
-
-
Using the plastic opening tool, remove the top rubber feet on the back panel as it hides one of the screws we will be removing.
Ask FixBot
-
-
-
Using a PH0 screwdriver, unscrew the ten 4.4mm Phillips head screws located on the back panel.
-
-
-
-
Using a PH0 screwdriver, unscrew the two 3.8mm PH0 Phillips head screws that hold the battery in place.
-
-
-
Carefully disconnect the cable connecting the top of the battery and remove the battery.
-
-
-
-
-
The network card is located at the top left corner of the motherboard.
-
Unscrew the 4.4mm PH0 Phillips screw at the top of the network card.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team S13-G3, Cagle Fall 2017 Member of USF Tampa, Team S13-G3, Cagle Fall 2017
USFT-CAGLE-F17S13G3
2 Members
72 Guides authored
