HP Officejet Pro 8600 Plus Front Panel Replacement
Maegan Betz and 3 other contributors
Last updated on May 29, 2018
Views: 4.9K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 19
- Past 30 Days:
- 88
- All Time:
- 4,949
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓The front panel door may not close properly after repeated use. This guide will show how to remove the front panel door.
What you need
Tools
-
-
-
Open the front panel door by pulling forward on the slot located on the front-left side of the printer.
Ask FixBot
-
-
-
Insert the plastic opening tool into the right socket connecting the front panel door to the hinge guide.
-
Pry the socket open, lifting the door hinge guide out of place.
-
-
-
Pull the door-hinge guide to the right to detach its left socket.
-
Lift the door-hinge guide upward and away from the front panel door.
-
-
-
Grab the front panel door close to its hinge on the right side.
-
Pull the front panel door away from the printer toward you.
-
-
-
-
Grab the front panel door close to its two hinges on the left side.
-
Pull the front panel door away from the printer toward you.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Cal Poly, Team S16-G4, Livingston Spring 2018 Member of Cal Poly, Team S16-G4, Livingston Spring 2018
CPSU-LIVINGSTON-S18S16G4
4 Members
60 Guides authored
