Introduction
Are the buttons not working on your printer? Consider using this guide to replace the buttons in your device.
What you need
-
-
Insert 2 fingers in the dent on the right side of the printer and pull towards the front of the printer.
-
Using fingers to open the cover of the scanner which located on the top of the printer.
Ask FixBot
-
-
-
Remove four 10mm screws on the panel with T8 torx security screwdriver.
-
Remove the cover of the top part.
-
-
-
-
Remove eight 10mm screws on the back of the controlling keyboard with T8 torx security screwdriver.
-
Remove the back board of the controlling keyboard.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
UC Davis, Team S11-G8, Lore Fall 2018 Member of UC Davis, Team S11-G8, Lore Fall 2018
UCD-LORE-F18S11G8
3 Members
8 Guides authored
