Skip to main content

Free Shipping on Domestic Orders $75+

HP Officejet 4215 All-In-One Full disassembly

What you need

  1. HP Officejet 4215 All-In-One Full disassembly, Details: step 1, image 1 of 1
    • You might have a hard time getting your screwdriver to fit into some of the screw holes.

    • There's a panel on the left side of the printer that has two screws under it. You might have a hard time getting that off too.

    Ask FixBot

    Add Comment

  2. HP Officejet 4215 All-In-One Full disassembly, Screws - Part One: step 2, image 1 of 3 HP Officejet 4215 All-In-One Full disassembly, Screws - Part One: step 2, image 2 of 3 HP Officejet 4215 All-In-One Full disassembly, Screws - Part One: step 2, image 3 of 3
    • Screw holes are outlined in red.

    • There are two on the right side under the ink carriage access door.

    • There are two in the back.

    • There are two under the lefthand panel opposite the ink carriage access door.

    Ask FixBot

    Add Comment

  3. HP Officejet 4215 All-In-One Full disassembly, Screws - Part Two: step 3, image 1 of 1
    • There are two screws under the control panel.

    Ask FixBot

    Add Comment

    • At this point you can just lift up and the whole top half will come off.

    Ask FixBot

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Susposter779

Member since: 08/25/24

52 Reputation

1 Guide authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 15

All Time: 237