Introduction
This guide will show the user how to remove the hard drive.
What you need
-
-
-
Turn the device over to expose the bottom of the device.
-
Slide the battery release all the way to the left.
-
There will be a click and the battery will be released from its compartment.
Ask FixBot
-
-
-
-
-
-
Locate the two Phillips head retaining screws which secure the hard drive compartment.
-
Use a Phillips #0 screwdriver to loosen the retaining screws.
-
Remove the panel covering the compartment.
-
-
-
Locate the three 6 mm Phillips head screws for the hard drive.
-
Use a Phillips #0 screwdriver to remove the screws.
-
-
-
Remove the hard drive from the compartment.
-
Pull the connector cable from the end of the hard drive.
-
-
-
Locate the two 6 mm Phillips head screws on each side of the hard drive.
-
Use a Phillips #0 screwdriver to remove the screws.
-
Remove the cover from the hard drive.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
USF Tampa, Team 1-4, Sullivan Winter 2015 Member of USF Tampa, Team 1-4, Sullivan Winter 2015
USFT-SULLIVAN-W15S1G4
4 Members
60 Guides authored
