HP Envy 700-030qe RAM Replacement
Sam Wheeler and 2 other contributors
Last updated on Dec 17, 2015
Views: 1.4K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 14
- Past 30 Days:
- 95
- All Time:
- 1,361
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓In this guide, we will show you the proper way to remove your RAM chips from your computer.
What you need
Tools
-
T15 Torx Screwdriver$7.99
-
-
-
-
Make sure that you are wearing your anti-static wristband. This will prevent damaging any internal parts with any built up static electricity.
-
Unscrew the 10.5mm screw on the left of the desktop using your hand.
Ask FixBot
-
-
-
You can now slide off the side panel of the desktop.
-
You should now have an opening on the side of your computer as shown in the second picture.
-
-
-
-
Undo the clips on each end of the chip as shown in the second picture.
-
Then you may carefully remove the RAM chips by pulling them out by their the ends.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 5-9, Maness Fall 2015 Member of Cal Poly, Team 5-9, Maness Fall 2015
CPSU-MANESS-F15S5G9
4 Members
60 Guides authored
