Introduction
Removing the bottom cover/door of the system is the first step in accessing the rest of the internal components of the system. After removing the screws, the cover is just held in place physically by its plastics, so be firm, but gentle, when removing it after loosening the connections.
What you need
-
-
-
Using the Philips #0 screwdriver, remove the 12 7.5mm screws from the bottom cover.
Ask FixBot
-
-
-
-
Using the plastic opening tool, carefully work the tool between the bottom cover and bottom chassis to loosen the connection.
-
Lift the bottom cover off of the system.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
USF Tampa, Team S1-G1, Thompson Fall 2017 Member of USF Tampa, Team S1-G1, Thompson Fall 2017
USFT-THOMPSON-F17S1G1
4 Members
72 Guides authored
