HP EliteBook x360 830 G5 Wireless LAN Module Replacement
Ashia Lewis and 5 other contributors
Last updated on May 7, 2024
Views: 1.1K
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 19
- Past 30 Days:
- 87
- All Time:
- 1,067
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Introduction
Go to step 1 ↓The following guide will instruct the user on the replacement of the Wireless LAN module or Wi-Fi card of an HP EliteBook x360 830 G5. The Wireless LAN module is a network adapter that allows users to access peer-to-peer, also known as local-access, networks.
Before starting this guide, be sure to turn off your laptop and unplug from the charging cord.
What you need
Tools
-
-
Spudger4.9
-
-
-
With the T5 screw-bit and screwdriver, loosen the five captive screws on the bottom of the laptop.
Ask FixBot
-
-
-
With a spudger or opening tool, pry above the computer's hinges and separate the posterior edge and sides.
-
-
-
-
-
Tool used on this step:Tweezers$4.99
-
Disconnect the coaxial antenna cables from the LAN module with a small pair of tweezers.
-
-
-
With the Phillips #1 screwdriver, loosen the single screw attaching the LAN module to the board.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
University of Alabama, Team 1-4, Bedsole Fall 2021 Member of University of Alabama, Team 1-4, Bedsole Fall 2021
UA-BEDSOLE-F21S1G4
4 Members
60 Guides authored
