Skip to main content

Free Shipping on Domestic Orders $75+

HP EliteBook 1050 G1 Camera Replacement

Views: 605

View statistics:

Past 24 Hours:
0
Past 7 Days:
12
Past 30 Days:
56
All Time:
605
Comments: 0

No one has left comments on this guide. Will you be first?

Go to guide comments
Completed: 0

No one has marked this guide "completed." Will you be the first?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: 8 minutes
Difficulty: Moderate
Better Introduction

Improve this guide by completing or revising its introduction.

HP EliteBook 1050 G1 Camera Replacement

Introduction

Go to step 1 ↓

This manual outlines the process of replacing the camera positioned above the screen on the HP EliteBook 1050 G1. Exercise caution when using the heat gun to prevent any damage to the computer or screen, don't forget to be sure to always operate safely and use the materials suggested. Let's proceed with care through the steps outlined in this guide to safely replace the screen on the HP EliteBook 1050 G1.

What you need

Parts

Tools

    1. HP EliteBook 1050 G1 Camera Replacement, Camera: step 1, image 1 of 1
      • Use a Jimmy to pry the plastic bezel away from the screen.

      Ask FixBot

      Add Comment

    2. HP EliteBook 1050 G1 Camera Replacement: step 2, image 1 of 2 HP EliteBook 1050 G1 Camera Replacement: step 2, image 2 of 2
      • Using the heat gun, remove the adhesive from the back of the camera.

      Ask FixBot

      Add Comment

    3. HP EliteBook 1050 G1 Camera Replacement: step 3, image 1 of 2 HP EliteBook 1050 G1 Camera Replacement: step 3, image 2 of 2
      • Disconnect the camera plug.

      • Remove the camera from the laptop.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 12

Past 30 Days: 56

All Time: 605