Introduction
Sometimes a devices battery has been recharged too many times. This recharging causes the battery to diminish over time and hold less of a charge. The purpose of this guide is to demonstrate how to replace a bad or warn battery on the HMDX Jam Plus.
What you need
-
-
-
Flip the device over so the bottom is facing up.
-
Use the large plastic opening tool to gently pry the rubber base from the device.
-
Slowly move the plastic opening tool around the edge of the rubber base to separate it from the plastic.
Ask FixBot
-
-
-
Use a Phillips #1 screwdriver to remove the four black 9mm screws from the device.
-
-
-
-
Gently separate the base from the rest of the device to reveal the battery and the main board.
-
-
-
Carefully use the plastic opening tool to remove the glue around the battery and speaker connectors.
-
Pull gently on the connectors to separate each one from the main board.
-
-
-
Use the plastic opening tool to gently pry the battery free from the rest of the device.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Team
Montana Tech, Team 10-3, Shirk Fall 2015 Member of Montana Tech, Team 10-3, Shirk Fall 2015
MTUM-SHIRK-F15S10G3
4 Members
48 Guides authored
6 Guide Comments
Where may battery be purchased?
Thanks,
zappenfusen
Where to purchase battery for hmdx jam speaker
Where can a battery be purchased?
What kind (especifications) that battery?
Where to buy battery for HMDX JAM.Bluetooth speaker
