Introduction
Figured I'd make this real quick since I didn't see anything out there about it.
What you need
-
-
-
Pull the back cover away from the body of the device. It will clip in multiple locations around the edge of the device.
Ask FixBot
-
-
-
Unscrew the screws from the back of the device. None are hidden.
-
-
-
Remove the antenna clips located on the bottom and top of the device on the back.
-
-
-
-
Pry the Mid-Frame away from the screen. It is clipped on around the edged.
-
Be careful near the buttons as the flex cable runs upwards.
-
-
-
Heat the device lightly.
-
Apply alcohol to the edges, around the battery.
-
Remove the battery from the device.
-
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
