Introduction
Replacing the harness for the GoPro camera is fairly easy. We will tell you how to remove the stabilizer which holds the harness, how to remove camera from the harness, and how to replace the harness itself.
What you need
-
-
-
Locate stabilizer collar’s unlock and lock symbols. Twist the collar counterclockwise to unlock the stabilizer from GoPro Karma body.
Ask FixBot
-
-
-
Remove the stabilizer by pulling the entire stabilizer out of the drone body.
-
-
-
-
-
-
Using a Hex 2.0mm screwdriver, remove the two 12 mm hex screws closest to the harness.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team S25-G14, Maness Spring 2018 Member of Cal Poly, Team S25-G14, Maness Spring 2018
CPSU-MANESS-S18S25G14
4 Members
72 Guides authored
