Giant Talon 29er Chainring Replacement
Ben Frisbie and one other contributor
Last updated on Jul 13, 2016
Views: 4.7K
View statistics:
- Past 24 Hours:
- 6
- Past 7 Days:
- 37
- Past 30 Days:
- 194
- All Time:
- 4,709
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 9 10
9 people have favorited (and subscribed to) this guide. Will you be next?
10 people have favorited (and subscribed to) this guide — including you!
Introduction
Go to step 1 ↓This guide will show how to remove, disassemble, and replace the chainrings from the crank arm on a Giant Talon 29er bicycle. The chainrings should be replaced when the chain starts to skip teeth while riding.
What you need
Parts
Tools
-
-
-
Push the chain tensioner towards the front of the bicycle to release the tension on the chain.
-
Unroute the chain from the chainrings.
Ask FixBot
-
-
-
Remove the crank arm and chainrings by pulling the crank arm away from the bicycle frame.
-
-
-
-
Rotate the largest chainring 45 degrees in either direction.
-
Remove the crank arm from the chainrings.
-
-
Reassemble your bicycle with the new chainrings by following these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Michigan Tech, Team 1-7, Lauer Spring 2016 Member of Michigan Tech, Team 1-7, Lauer Spring 2016
MTU-LAUER-S16S1G7
1 Member
12 Guides authored
