Garmin STRIKER 4 Backing Replacement
Jordan Snow and 3 other contributors
Last updated on Dec 22, 2023
Views: 650
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 15
- Past 30 Days:
- 72
- All Time:
- 650
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓If you need to replace the backing of a Garmin STRIKER 4, access it with this guide. Some reasons you may be replacing the backing include corroded pins and the device not charging.
What you need
Tools
-
-
-
Remove all six 6 mm screws using a Phillips #0 screwdriver.
-
Detach and flip the backside to open the device.
-
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Utah Tech University, Team 1-5, McMurrin Fall 2023 Member of Utah Tech University, Team 1-5, McMurrin Fall 2023
UTAHTECH-MCMURRIN-F23S1G5
3 Members
48 Guides authored
