Introduction
In this guide, we are going to provide step-by-step instructions that will show how to properly replace the device's touch screen.
What you need
-
-
Remove the stand by depressing the tab and rocking the round interface back away from the tab, pulling it away from the Garmin unit.
Ask FixBot
-
-
-
Remove the four 4mm hex screws from the four corners of the unit using a T5 bit.
-
-
-
-
Firmly force a plastic spudger into the bottom seam and pry open a section. Use a prying/pushing motion to force the tool into the unit until you feel a click.
-
Repeat this all the way around the seam.
-
-
-
Do not attempt to separate the unit until all the tabs have been separated. Once the seam is completely separated, you can lift the back away from the screen easily.
-
-
-
Retrieve a new screen and connect the flat-gold wire to the socket from where you removed the old screen.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
USF Tampa, Team 16-5, Eyestone Fall 2016 Member of USF Tampa, Team 16-5, Eyestone Fall 2016
USFT-EYESTONE-F16S16G5
3 Members
5 Guides authored
2 Guide Comments
Were can I order a 6 inch screen for a Garmin Nuvi 2689 LMT
The screws will not come out. I have the screwdriver that was sent with replacement screen. Help!!
