Free Shipping on Domestic Orders $75+

Introduction

This replacement will require use of both hands and unusual hand placement. Pay close attention to the images to ensure success in replacing this part.

What you need

Step 1 Wrist Strap

Garmin Fenix 3 Wrist Strap Replacement, Wrist Strap: step 1, image 1 of 1

Identify the screws near the bases of two wrist straps.

Edit

Step 2

Hold one screwdriver firmly in one hand, as demonstrated in the image.

Edit

Step 3

Secure the watch in the same hand, positioning the screwdriver over the screw.

Edit

Step 4

Once the watch is secure, insert the screwdriver into the screw, and hold firmly.

Edit

Step 5

With the watch and the first screwdriver secure, insert the second screwdriver into the opposite screw.
Holding the first screwdriver firmly, unscrew using the second screwdriver.

Edit

Step 6

Remove the bar from the wrist strap to release.
Depending on which side the bar is inserted, you may end up loosening the screw instead of the bar. Keep this in mind to avoid losing your screws.