Garmin Drive 50 LM Case Removal
Jason Wade and one other contributor
Last updated on Dec 17, 2025
Views: 246
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 13
- Past 30 Days:
- 50
- All Time:
- 246
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Follow this guide in order to remove the front casing of the Garmin Drive 50 LM. Be careful as if the case has not been removed previously, it could take some extra effort to remove it.
What you need
Tools
-
-
-
Use a T5 Torx screwdriver to remove the four 9 mm-long screws securing the case.
Ask FixBot
-
-
-
Insert an opening tool into the seam between the case and the chassis.
-
Pry around the perimeter of the device until the case releases.
-
-
-
Once open, set the screen down at an offset to be able to see the yellow cable.
-
-
-
-
With tweezers, flip up the brown locking flap to release the ribbon cable.
-
Gently disconnect the yellow ribbon cable.
-
-
Team
University of North Texas, Team 7-7, Kilpatrick Fall 2025 Member of University of North Texas, Team 7-7, Kilpatrick Fall 2025
UNT-KILPATRICK-F25S7G7
4 Members
72 Guides authored
