Introduction
This guide explains how to safely remove and replace the case of the Garmin Dash Cam 35 if it is damaged or broken.
What you need
-
-
Remove the two 1.7 mm screws holding the case in using a T6 Torx screwdriver.
Ask FixBot
-
-
-
Use opening picks and the opening tool to pry the two pieces of the case apart.
-
-
-
-
Carefully pinch the power cable, and slowly remove it from the motherboard slot.
-
-
-
Carefully lift the lock on the motherboard for the ribbon cable. Unslot the ribbon after the lock is undone.
-
Remove the case.
-
To reassemble your device, follow these instructions in reverse order.
Team
Purdue University Northwest, Team 3-2, Dieterle Fall 2025 Member of Purdue University Northwest, Team 3-2, Dieterle Fall 2025
PNW-DIETERLE-F25S3G2
5 Members
6 Guides authored
