Free Shipping on Domestic Orders $75+

Introduction

If you need to open or replace the back cover of the GameSir X2 Type-C, use this guide. This guide provides access to the left joystick and trigger assembly. This guide is a pre-requisite for most replacements inside the housing of the device.

What you need

Step 1 Back Cover

GameSir X2 Type-C Back Cover Replacement, Back Cover: step 1, image 1 of 2

GameSir X2 Type-C Back Cover Replacement, Back Cover: step 1, image 2 of 2

Turn the device so the back faces you.

Edit

Step 2

Remove the eight 6 mm T6 Torx screws.

Edit

Step 3

Use a straight edge to remove the rubber pad on the front of the device.

Edit

Step 4

Remove the four 4.5 mm screws with a Phillips #000 screwdriver.

Edit

Step 5

Use a straight edge to pry open the controller, following the seam on the controller.
Some force is necessary, but be careful not to damage any of the clips holding the controller together.

Edit