Skip to main content

Free Shipping on Domestic Orders $75+

GameSir Cyclone 2 Bumper and Trigger Replacement

What you need

  1. GameSir Cyclone 2 Bumper and Trigger Replacement, Face Plate: step 1, image 1 of 3 GameSir Cyclone 2 Bumper and Trigger Replacement, Face Plate: step 1, image 2 of 3 GameSir Cyclone 2 Bumper and Trigger Replacement, Face Plate: step 1, image 3 of 3
    • Flip the controller around so the back part is facing you.

    • Use a T6 Torx screwdriver to remove seven screws from the back of the controller.

    • One of the screws is hidden under the sticker. Use a pair of tweezers to lift the sticker and reveal the screw.

    Ask FixBot

    Add Comment

  2. GameSir Cyclone 2 Bumper and Trigger Replacement: step 2, image 1 of 1
    • The screws holding the face plate are of two different lengths:

    • The two longer screws belong to the two top screw sockets on the controller.

    • The five shorter screws belong in the five bottom screw sockets, two per handle, and on in the center of on the controller.

    Ask FixBot

    Add Comment

  3. GameSir Cyclone 2 Bumper and Trigger Replacement: step 3, image 1 of 2 GameSir Cyclone 2 Bumper and Trigger Replacement: step 3, image 2 of 2
    • Face the controller toward you.

    • Gently lift the face plate off the controller.

    • The d-pad and action buttons will become loose once the face plate is lifted.

    Ask FixBot

    Add Comment

  4. GameSir Cyclone 2 Bumper and Trigger Replacement, Left and Right Bumpers and Triggers: step 4, image 1 of 1
    • Note the bumpers and triggers on the controller.

    Ask FixBot

    Add Comment

  5. GameSir Cyclone 2 Bumper and Trigger Replacement: step 5, image 1 of 1
    • Use a Phillips #00 screwdriver to remove two screws on either side of the power button.

    • Remove the assembly that includes the power button and the top bumper buttons.

    Ask FixBot

    Add Comment

  6. GameSir Cyclone 2 Bumper and Trigger Replacement: step 6, image 1 of 1
    • Remove the bumpers and triggers from the controller.

    Ask FixBot

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order. Take your e-waste to an R2 or e-Stewards certified recycler.

Cancel: I did not complete this guide.

Ross Debortoli

Member since: 10/17/25

325 Reputation

3 Guides authored

Team

UMass Dartmouth, Team 2-6, Bowman Fall 2025 Member of UMass Dartmouth, Team 2-6, Bowman Fall 2025

UMASSD-BOWMAN-F25S2G6

4 Members

7 Guides authored

5 Guide Comments

Onde eu consigo os botões r2/l2?

Elano Ferreira - Reply Share

I would like to know if someone fixed this buttons, the cover of my L2 button popped of, the one attached to the motherboard, and i think i'm let a small blue piece escape, if someone fixed this before and could give a hint it would be nice

Diogo Holstein - Reply Share

Does anybody know where i can get these replacement parts? Gamesir doesn’t sell replacement parts

Florianus Arvel Winanto - Reply Share

I guess ali express would be a good place to find this https://share.google/h6P62vcuD7WNVSHLR

Diogo Holstein - Reply Share

More information could be found in the gamesir discord channel -> https://discord.com/channels/10089102875...

Diogo Holstein - Reply Share

Add Comment

View Statistics:

Past 24 Hours: 5

Past 7 Days: 28

Past 30 Days: 129

All Time: 808