Fujitsu Lifebook Stylistic Q584 USB port Replacement

Remove the white sticker covering the screws (if applicable).

Use the PH1 screwdriver to remove the four 2 mm screws from the the backside of the device.

Insert the plastic opening tool along the seam of the back case.

Gently slide the plastic opening tool along the entire seam popping the clips free.

Carefully lift the back case and remove the smartcard ribbon from the motherboard.

Remove the ten 3mm screws with a PH00 screwdriver from the shield.

Remove the grey docking station port cover.

Gently slide the plastic opening tool along the entire seam popping the clips free.

Lift the shield away from the device and remove the fingerprint scanner's ribbon from the motherboard.

Remove 2mm screw with a PH1 screwdriver from USB board

Disconnect USB periphery ribbon from motherboard

Pull USB board up to remove.