Fujitsu Lifebook Stylistic Q584 Inner Back Shield Replacement
Spencer Bacon and 4 other contributors
Last updated on Feb 19, 2020
Views: 1K
View statistics:
- Past 24 Hours:
- 6
- Past 7 Days:
- 23
- Past 30 Days:
- 92
- All Time:
- 1,015
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This is another protective layer you will need to remove prior to accessing the internal parts of the device.
What you need
Tools
-
-
-
Remove the white sticker covering the screws (if applicable).
-
Use the PH1 screwdriver to remove the four 2 mm screws from the the backside of the device.
Ask FixBot
-
-
-
Insert the plastic opening tool along the seam of the back case.
-
Gently slide the plastic opening tool along the entire seam popping the clips free.
-
-
-
Carefully lift the back case and remove the smartcard ribbon from the motherboard.
-
-
-
-
-
-
Remove the ten 3mm screws with a PH00 screwdriver from the shield.
-
-
-
Gently slide the plastic opening tool along the entire seam popping the clips free.
-
-
-
Lift the shield away from the device and remove the fingerprint scanner's ribbon from the motherboard.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
Washington State, Team S1-G3, Phelps-Hillen Fall 2017 Member of Washington State, Team S1-G3, Phelps-Hillen Fall 2017
WSU-PHELPS-HILLEN-F17S1G3
5 Members
120 Guides authored
