Fujitsu Lifebook S6120 PCI Adapter Replacement
Jaimie Nakamura and 2 other contributors
Last updated on May 7, 2024
Views: 1.5K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 16
- Past 30 Days:
- 77
- All Time:
- 1,477
Comments: 1
1 guide comment.
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓If your Lifebook won't connect to a wireless network this guide will show you how to replace a wireless adapter so your Lifebook will get a signal.
-
-
-
Push the two tabs in towards the laptop.
-
Lift the battery up and out from the frame of the laptop.
Ask FixBot
-
-
-
-
-
Use a plastic opening tool to lift the back of the hinge cover on the left and right sides of the computer.
-
-
Tool used on this step:Tweezers$4.99
-
Use the tweezers to disconnect the ribbon cable from the motherboard.
-
-
-
-
With the tweezers detach hinge cover cables from the motherboard.
-
Remove hinge cover.
-
-
-
-
-
Tool used on this step:Tweezers$4.99
-
Use tweezers to remove the wires from the Adapter.
-
-
-
Take out the Adapter and carefully pull the wires out from the metal casing.
-
To reassemble your device, follow these instructions in reverse order.
Team
UMass Dartmouth, Team S5-G5, Peak Spring 2018 Member of UMass Dartmouth, Team S5-G5, Peak Spring 2018
UMASSD-PEAK-S18S5G5
3 Members
108 Guides authored
