Fisher Paykel Neopuff Manometer Replacement - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

Introduction

Please refer to page 7 of the device’s Technical Manual for source information.

What you need

Step 1 Manometer

Fisher Paykel Neopuff Manometer Replacement, Manometer: step 1, image 1 of 1

Remove the back cover, fixed by four screws.

Ask FixBot

Step 2

Disconnect the tube from the manometer.

Ask FixBot

Step 3

Fisher Paykel Neopuff Manometer Replacement: step 3, image 1 of 1

Remove the manometer by unscrewing the two retaining nuts.

Ask FixBot

Step 4

Fit the new manometer into the front panel.

Ask FixBot

Step 5

Tighten the retaining nuts.

Ask FixBot

Step 6

Reconnect the manometer tube.

Ask FixBot

Step 7

Refit the front panel to the back cover with the four screws.

Ask FixBot

Step 8

Carry out the manometer performance test. It is recommended to record the lot number from the box label of the replacement manometer on the maintenance checklist.

Ask FixBot

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with 1 other contributor

Tyler Lin

Member since: 05/04/20

325 Reputation

2 Guides authored

Team

Cal Poly, Team S1-G6, Zimmerman Spring 2020 Member of Cal Poly, Team S1-G6, Zimmerman Spring 2020

CPSU-ZIMMERMAN-S20S1G6

4 Members

27 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 14

All Time: 363