Introduction
This guide will show you how to replace the stop light on a 2013 Fiat 500 Pop. A burned-out stop light can make your vehicle unsafe and lead to a traffic violation, so replacing it promptly ensures your car remains visible and road-legal.
What you need
-
-
Remove the two 10 mm bolts to the side of the taillight.
Ask FixBot
-
-
-
Using a pry tool or something flat, carefully get in-between the light and the car and pry the light off.
-
-
-
-
Clip the panel back onto the light and put it back into the frame of the car.
-
Replace the two bolts with a 10 mm socket.
-
-
-
Open the hatch door and locate the two screws under the hatch lip. Then, use the 10mm socket and unscrew both top and bottom screws.
-
-
-
Remove the casing carefully. There is a wire harness that needs to be disconnected. See red line under the wire harness.
-
Carefully insert a flat head screw driver into the lock lip while simultaneously pulling the harness out of its socket.
-
To reassemble your device, follow these instructions in reverse order.
