Free Shipping on Domestic Orders $75+

Introduction

This guide is for the Euhomy IM-06D icemaker. This guides purpose is to replace the digital display. This part controls the lights and controls of the icemaker on the top of the cover. Some symptoms of this would be the lights for the buttons not turning on or them no longer working. Please make sure to unplug the device before starting all guides.

What you need

1. Step 1 Lid
  Open the lid.
  
  Remove the two 5 mm Phillips screws that secure the lid.
  
  Gently lift the lid off, with care not to damage or strain the attached cable.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
2. Step 2
  Use a jimmy to pop off the white cover on the back of the lid.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
4. Step 3
  Remove the two 5 mm Phillips screws that secure the display PCB.
  
  Remove the lid.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
1. Step 4 Digital Display Replacment
  Disconnect the display connector.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024

Conclusion

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

Cancel: I did not complete this guide.

One other person completed this guide.