Epson Powerlite 410W Top Cover Replacement - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

What you need

Step 1 Top Cover

Epson Powerlite 410W Top Cover Replacement, Top Cover: step 1, image 1 of 1

Press the power button located on top of the projector.
Remember to let the projector cool off completely after turning off the power before beginning the repair.

Ask FixBot

Step 2

Epson Powerlite 410W Top Cover Replacement: step 2, image 1 of 1

Remove eight screws from the bottom of the device using a Phillips #00 screwdriver.

Ask FixBot

Step 3

Epson Powerlite 410W Top Cover Replacement: step 3, image 1 of 3

Epson Powerlite 410W Top Cover Replacement: step 3, image 2 of 3

Epson Powerlite 410W Top Cover Replacement: step 3, image 3 of 3

Turn the projector so the power button is on top.
Gently pull up the cover until it pops off.
Do not pull too far; a ribbon cable still connects the top cover to the motherboard.
Disconnect the ribbon cable that attaches the cover to the motherboard.
Remove the cover and place to the side.

Ask FixBot

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

Kristen Gismondi

Member since: 11/12/14

107,779 Reputation

270 Guides authored

+43 more badges

Team

iFixit Member of iFixit

Staff

123 Members

28,230 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 19

All Time: 192