Epiphone ES-335 PRO Tuner Replacement
Michaih Ley Bayani and one other contributor
Last updated on Jun 11, 2018
Views: 1.9K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 16
- Past 30 Days:
- 82
- All Time:
- 1,927
Comments: 1
1 comment on steps.
Completed: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Follow these steps to replace a faulty or broken tuner at the head of the Epiphone ES-335 PRO electric guitar. This component of the guitar can also be changed to upgrade the design of the guitar to your liking.
What you need
Tools
-
-
-
Using the tuner, loosen the string by turning the tuner.
-
Continue to loosen the string until it is easily unwrapped and pulled out of the tuner.
Ask FixBot
-
-
-
On the bridge of the guitar, push the string through the back until the other end is visible. Then grasp and pull the string all the way out.
-
-
-
-
-
Using a phillips head #2 screwdriver, unscrew the two 1.0 mm length screws on the sides of the tuner.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Team
University of Memphis, Team S1-G4, Kim Spring 2018 Member of University of Memphis, Team S1-G4, Kim Spring 2018
UM-KIM-S18S1G4
4 Members
48 Guides authored
