Step 1 Wheel Assembly

• Gently turn the robot upside down.
• Place the robot on a stable surface to prevent it from rolling or falling.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2




• Use a flathead 2.5 mm screwdriver to remove the 5.7 mm screw from the wheels.
• A tool should have been provided in the box for this purpose.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• Pull the wheel assembly towards you so it comes straight off without resistance.
• If there is resistance, make sure to apply gentle force when pulling as it can get damaged with too much force.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

<iframe id="dozuki-embed-172896" src="https://www.ifixit.com/Guide/embed/172896/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-172896"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://www.ifixit.com/Guide/embed/172896" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Preview