Emerson VCR953 Top Shell Removal
Julian and one other contributor
Last updated on Jul 24, 2020
Views: 359
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 24
- Past 30 Days:
- 92
- All Time:
- 359
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓If you need to get into your Emerson VCR953 to clean the heads or do repairs on one of the circuit boards inside this shows how to take the top shell of to gain access
What you need
Tools
-
-
-
Remove the two 1/2" long #2 Philips screws from the rear of the case
Ask FixBot
-
-
-
Lift up on the back case and slide the top case back until it is free from the rest of the case
-
-
-
-
You will now have access to all the circuit boards and the top of all mechanical parts.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
