EQ 9 Service menu
VauWeh and 3 other contributors
Last updated on Oct 5, 2026
Views: 15K
View statistics:
- Past 24 Hours:
- 24
- Past 7 Days:
- 172
- Past 30 Days:
- 542
- All Time:
- 15,222
Comments: 4
4 comments on steps.
Completed: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓The service menu is useful for testing components and sensors. Furthermore, a lot of statistics and errors are displayed.
-
-
-
Switch the appliance off. Pull the plug and insert it again into the socket.
-
Press and hold the two buttons 'ml' and 'Two cups' at the same time. Switch the machine on. When the service menu appears, release the two buttons.
-
You now have a large selection:
-
Turn the large wheel to navigate.
-
To go to a sub-item, press the "ml" button.
-
To start a test, press the large wheel.
-
To go back, press the "Beans" button.
-
To exit the service menu, press the power button.
Ask FixBot
-
-
-
Work through the steps in reverse order to reassemble your device.
Cancel: I did not complete this guide.
One other person completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
Team
Repair is War on Entropy Member of Repair is War on Entropy
Community
43 Members
7,058 Guides authored
